Creating the “Authhash” for Shoutcast v2 servers.

Support

Level 1 Support
Staff member
This guide explains how to configure the 'Shoutcast v2' “Authhash” settings.

'Shoutcast v2' now requires you to create an 'Authorization Key' (Authhash) for your stream so that it can be registered for the Shoutcast directories and as a 'Public' stream. If a streams 'Authhash' settings are not completed a server will act as 'Private' until it is registered. If you want your station to be publicly available, then you will need an authorization key. Please note this is not required for private stations.
requires_registration_shoutcast_directory-png.1038


Please see the following wiki page regarding Shoutcast's “public” listing requirements. Some more detailed information on the 'SHOUTcast Authhash Management' can be found here.

Creating the “Authhash”

In order to create your 'Authorization Key' (Authhash), first click on the 'Admin' link from the navigation menu found on the left of your control panels 'Overview' page.

server_admin_page-png.1040


This will then take you to your servers “SHOUTcast Stream Status” page.

At the top of this page to the right is your servers 'Admin' login.

server_login-png.1041


The username for this is 'Admin' and the password will be the same as your servers control panel administrator password.

server_admin_login-png.1039


Once logged in you next need to use the 'Create Authhash' link.

create_authhash-png.1037

You are then next taken to a page which page allows you to enter or amend the authhash to be used for your Shoutcast v2 server. As you will have not yet created this, you again need to click on the 'Create Authhash' button.

create_authhash-png.1356

Once you have clicked on the 'Create Authhash' button again you are taken to a page to either sign in or create a new account. As you will have likely not yet created an account with Shoutcast then select "First time here? Create a new account".
create_account-png.1355

Once you have registered your account you will be sent a confirmation email. When you have confirmed your account and logged in you will next need to select the green 'SHOUTcast (DNAS)' box. Once selected, underneath this box the Authhash configuration settings will appear.
shoutcas_dnas-png.1357

In this section you will need to configure the following settings:

Radio station name – Enter your stations / streams title here.
Tags – Enter any keywords or tags relevant to your station.
Select your radio station music styles. Maximum 5 styles. – Select between 2 to 5 genres to be associated with your station.
Cover – Here you can upload a logo / cover art for your station.
Description – Give your radio station a description.
Country – Select your country.
Language – Select your language.
Time zone – Select your relevant time zone.
Website – Enter your own websites URL here.
Existing Stream URL – Here your enter your servers stream URL. So for example: http://uk5.internet-radio.com:8347
Radio Type – Select whether you are a "online station only" or a "online and AM/FM station".
Stream format – Here you select the stream format (from either AAC or Mp3) and the bitrate for your stream.

Once completed, finally accept the terms and conditions to "Finalize Radio Creation" and then click on the 'Save' button and your server will then be registered with Shoutcast (which only usually takes a few seconds). This will then become a 'Public' server available on the Shoutcast directories as well as within our own directories.

stream_up_and_public-png.1042

:)
 

Attachments

  • create_authhash.png
    create_authhash.png
    11.3 KB · Views: 17,735
  • requires_registration_shoutcast_directory.png
    requires_registration_shoutcast_directory.png
    15.8 KB · Views: 18,388
  • server_admin_login.png
    server_admin_login.png
    14.9 KB · Views: 17,832
  • server_admin_page.png
    server_admin_page.png
    5.3 KB · Views: 17,244
  • server_login.png
    server_login.png
    2.5 KB · Views: 17,109
  • stream_up_and_public.png
    stream_up_and_public.png
    10.8 KB · Views: 17,390
  • create_account.png
    create_account.png
    10.6 KB · Views: 8,242
  • create_authhash.png
    create_authhash.png
    14.1 KB · Views: 8,335
  • shoutcas_dnas.png
    shoutcas_dnas.png
    7.6 KB · Views: 8,187

gulbis37

Member
I use Shoutcast 2.5.1 724 posix/linux x64,when I try to make summary(description) or put tags,and update info,I launch pop-up-THE WEBSITE MUST SPECIFY HTTP OR HTTPS.
 

Support

Level 1 Support
Staff member
Hi gulbis37,

Ok so when you enter your websites url just make sure you put either http:// or https:// at the start of the url. If this is still giving you error messages then we can only suggest contacting shoutcast.com themselves for some help with this.
 

gulbis37

Member
Hi gulbis37,

Ok so when you enter your websites url just make sure you put either http:// or https:// at the start of the url. If this is still giving you error messages then we can only suggest contacting shoutcast.com themselves for some help with this.
Thank you,sorted.
 

houseradio

New Member
It doesn't work this way. They have changed the step with Existing Stream URL – Here your enter your servers stream URL. It is missing when creating new station.
 

Support

Level 1 Support
Staff member
Hi houseradio,

Yes we are aware that shoutcast.com have recently changed the way in which this all works with their authhash settings and it now requires your server account to be running their very latest version of Shoutcast v2.6 which we do not run at this time here on our servers (which is v2.5).

Our Shoutcast version gets updated along side Centovacast (the control panel software), so when the next Centovacast update comes out we imagine we'll see a newer Shoutcast version too. We could upgrade just Shoutcast itself to v2.6, but we run the risk of compatibility issues with Centovacast so it's best we leave it to the Centova guys.

Hopefully an update (or Centovacast v4) will be on its way very soon!
 
Top